Video Friday: Japan’s Giant Gundam Robot Is Nearly Complete

Video Friday is your weekly selection of awesome robotics videos, collected by your Automaton bloggers. We’ll also be posting a weekly calendar of upcoming robotics events for the next few months; here’s what we have so far (send us your events!): AWS Cloud Robotics Summit – August 18-19, 2020 – [Online Conference] CLAWAR 2020 – August 24-26, 2020 – [Virtual Conference] ICUAS 2020 – September 1-4, 2020 – Athens, Greece ICRES 2020 – September 28-29, 2020 – Taipei, Taiwan AUVSI EXPONENTIAL 2020 – October 5-8, 2020 – [Online Conference] IROS 2020 – October 25-29, 2020 – Las Vegas, Nev., USA ICSR 2020 – November 14-16, 2020 – Golden, Co., USA Let us know if you have suggestions for next week, and enjoy today’s videos.

Little Wheeled Robot Puts on New Shoes to Go Offroad

When designing a mobility system for a robot, the goal is usually to come up with one single system that allows your robot to do everything that you might conceivably need it to do, whether that’s walking, running, rolling, swimming, or some combination of those things. This is not at all how humans do it, though: If humans followed the robot model, we’d be walking around wearing some sort of horrific combination of sneakers, hiking boots, roller skates, skis, and flippers on our feet. Instead, we do the sensible thing, and optimize our mobility system for different situations by putting on different pairs of shoes.  At ICRA, researchers from Georgia Tech demonstrated how this shoe swapping could be applied to robots. They haven’t just come up with a robot that can use “swappable propulsors”—as they call the robot’s shoes—but crucially, they’ve managed to get it to the swapping all by Continue reading Little Wheeled Robot Puts on New Shoes to Go Offroad

Video Friday: NASA Launches Its Most Advanced Mars Rover Yet

Video Friday is your weekly selection of awesome robotics videos, collected by your Automaton bloggers. We’ll also be posting a weekly calendar of upcoming robotics events for the next few months; here’s what we have so far (send us your events!): AWS Cloud Robotics Summit – August 18-19, 2020 – [Virtual Conference] CLAWAR 2020 – August 24-26, 2020 – [Virtual Conference] ICUAS 2020 – September 1-4, 2020 – Athens, Greece ICRES 2020 – September 28-29, 2020 – Taipei, Taiwan AUVSI EXPONENTIAL 2020 – October 5-8, 2020 – [Virtual Conference] IROS 2020 – October 25-29, 2020 – Las Vegas, Nevada ICSR 2020 – November 14-16, 2020 – Golden, Colorado Let us know if you have suggestions for next week, and enjoy today’s videos.

Remotely Operated Robot Takes Straight Razor to Face of Brave Roboticist

Roboticists love hard problems. Challenges like the DRC and SubT have helped (and are still helping) to catalyze major advances in robotics, but not all hard problems require a massive amount of DARPA funding—sometimes, a hard problem can just be something very specific that’s really hard for a robot to do, especially relative to the ease with which a moderately trained human might be able to do it. Catching a ball. Putting a peg in a hole. Or using a straight razor to shave someone’s face without Sweeney Todd-izing them.

Video Friday: Massive Robot Joins Swedish Acrobats on Stage

Video Friday is your weekly selection of awesome robotics videos, collected by your Automaton bloggers. We’ll also be posting a weekly calendar of upcoming robotics events for the next few months; here’s what we have so far (send us your events!): AWS Cloud Robotics Summit – August 18-19, 2020 – [Online Conference] CLAWAR 2020 – August 24-26, 2020 – [Virtual Conference] ICUAS 2020 – September 1-4, 2020 – Athens, Greece ICRES 2020 – September 28-29, 2020 – Taipei, Taiwan IROS 2020 – October 25-29, 2020 – Las Vegas, Nevada ICSR 2020 – November 14-16, 2020 – Golden, Colorado Let us know if you have suggestions for next week, and enjoy today’s videos.

Video Friday: This Terrifying Robot Will Cut Your Hair With Scissors

Video Friday is your weekly selection of awesome robotics videos, collected by your Automaton bloggers. We’ll also be posting a weekly calendar of upcoming robotics events for the next few months; here’s what we have so far (send us your events!): CLAWAR 2020 – August 24-26, 2020 – [Virtual Conference] ICUAS 2020 – September 1-4, 2020 – Athens, Greece ICRES 2020 – September 28-29, 2020 – Taipei, Taiwan IROS 2020 – October 25-29, 2020 – Las Vegas, Nevada ICSR 2020 – November 14-16, 2020 – Golden, Colorado Let us know if you have suggestions for next week, and enjoy today’s videos.

A Bug-Sized Camera for Bug-Sized Robots and Bug-Sized Bugs

As if it’s not hard enough to make very small robots that can , once you’ve gotten the power and autonomy all figured out (good luck with that), your robot isn’t going to be all that useful unless it can carry some payload. And the payload that everybody wants robots to carry is a camera, which is of course a relatively big, heavy, power hungry payload. Great, just great. This whole thing is frustrating because tiny, lightweight, power efficient vision systems are all around us. Literally, all around us right this second, stuffed into the heads of insects. We can’t make anything quite that brilliant (yet), but roboticists from the University of Washington, in Seattle, have gotten us a bit closer, with the smallest wireless, steerable video camera we’ve ever seen—small enough to fit on the back of a microbot, or even a live bug.

Video Friday: Robotic Glove Features Telescopic Extra Thumb

Video Friday is your weekly selection of awesome robotics videos, collected by your Automaton bloggers. We’ll also be posting a weekly calendar of upcoming robotics events for the next few months; here’s what we have so far (send us your events!): RSS 2020 – July 12-16, 2020 – [Virtual Conference] CLAWAR 2020 – August 24-26, 2020 – [Virtual Conference] ICUAS 2020 – September 1-4, 2020 – Athens, Greece ICRES 2020 – September 28-29, 2020 – Taipei, Taiwan IROS 2020 – October 25-29, 2020 – Las Vegas, Nevada ICSR 2020 – November 14-16, 2020 – Golden, Colorado Let us know if you have suggestions for next week, and enjoy today’s videos.

Malleable Structure Makes Robot Arm More Versatile

The majority of robot arms are built out of some combination of long straight tubes and actuated joints. This isn’t surprising, since our limbs are built the same way, which was a clever and efficient bit of design. By adding more tubes and joints (or degrees of freedom), you can increase the versatility of your robot arm, but the tradeoff is that complexity, weight, and cost will increase, too. At ICRA, researchers from Imperial College London’s REDS Lab, headed by Nicolas Rojas, introduced a design for a robot that’s built around a malleable structure rather than a rigid one, allowing you to improve how versatile the arm is without having to add extra degrees of freedom. The idea is that you’re no longer constrained to static tubes and joints but can instead reconfigure your robot to set it up exactly the way you want and easily change it whenever you feel Continue reading Malleable Structure Makes Robot Arm More Versatile

Video Friday: Quadruped Robot HyQ Learning the Ninja Walk

Video Friday is your weekly selection of awesome robotics videos, collected by your Automaton bloggers. We’ll also be posting a weekly calendar of upcoming robotics events for the next few months; here’s what we have so far (send us your events!): RSS 2020 – July 12-16, 2020 – [Virtual Conference] CLAWAR 2020 – August 24-26, 2020 – [Virtual Conference] ICUAS 2020 – September 1-4, 2020 – Athens, Greece ICRES 2020 – September 28-29, 2020 – Taipei, Taiwan IROS 2020 – October 25-29, 2020 – Las Vegas, Nevada ICSR 2020 – November 14-16, 2020 – Golden, Colorado Let us know if you have suggestions for next week, and enjoy today’s videos.